Stainless Steel Shelving Systems
Steel Shelving - Airdeck Shelves
The Airdeck kitchen shelving
wire shelf forms the heart of the Quartermaster Stainless steel shelving
system. The open shelf and posts are designed to allow light and air to
flow freely. Weather airflow is used to cool and keep fresh, to remove
dirt and contaminants or to save valuable seconds in detecting and
containing fire, Airdeck improves performance over solid shelving.
Quartermaster Stainless steel shelving is ideal for hygienic
environments, as it has no accessible inner voids to hide contamination.
Stainless Steel Shelving
Manufactured using 304 grade
stainless steel, electro-polished to remove surface imperfections and
impurities and to provide a bright finish. This process is normally
required for sterile applications. Stainless steel has a very long life
even under arduous conditions and is suitable for most environments.
Shelf Supports, the two pieces of which,
click and hold in place on the required locating ring support the shelf
by a wedge action that is rigid and strong. Assembly is simple,
adjustable and fast. Shelf hooks are used to suspend shelves, this
allows for space efficient 90 degree open corners. Finishes match
shelves, Note that using hooks reduces shelf loading and can not be used
with solid shelves.
Tall, uneven and
marine applications require additional stability. Heavy duty feet, top
ties and wall fixings, fixed and adjustable improve stability.
basic Quartermaster Stainless Steel shelving components, posts and
shelves are designed for simple and fast assembly. Accessories are
designed to get the best from the available space.
Posts are formed from 25.4mm tube with location rings at 62.5mm centres.
Standard posts are 1700mm high, although sizes from 950mm to 2450mm are
also stocked. Posts are fitted with black top caps and a threaded foot
insert that accepts an 8mm rigid glide foot. 15mm of adjustment is
provided. Greater adjustment can be provided by using an alternative
insert and foot. Posts are finished with chrome plate for normal
applications, with an additional clear epoxy coat for additional
protection against corrosion. Stainless steel posts in mill finish 304
grade are also available for clean or heavy wire applications.
Framed 50mm square wire mesh retaining panels, singly or in sets fit
sides and backs of shelf units. On mobile racks panels extend above the
top shelf to retain items on the top shelf. Panel finishes match
shelves. Panels hook over top shelf and are tied on intermediate
Ledges (150mm high) are fitted to back and sides of individual shelves
to retain stock.
Shelf dividers (200mm high) can be fitted to individual shelves
providing discreet locations.
Divider rods create fixed locations within a bay of shelving. Rods are
positioned using clips or externally using rod hooks. Stocked in plate
and bright zinc.
3 sided braces are used to improve stability on 4 post units where the
bottom shelf is omitted to provide floor access for bins or trolleys.